Get Started
students using FloWater refill station inside school

Blog

How school districts remove lead from drinking water: a 3Ts plan

School districts remove lead from student drinking water in three moves: test every outlet, take any outlet with a high result out of service, and put purification at the point where students actually drink. The U.S. EPA’s 3Ts program (Training, Testing and Taking Action) is the framework districts use to organize that work. For the taking-action step, a FloWater Refill Station at each fill point purifies water right where students drink it, with 7x Advanced Purification removing up to 99.9% of contaminants, including lead.

Why lead shows up in school water even when city water meets standards

Lead usually enters drinking water inside the building, from older pipes, solder and fixtures, rather than from the treatment plant. That’s why two fountains in the same school can test differently. EPA is direct about the stakes: there is no safe level of lead in drinking water, especially for children.

Step 1: Train your team and test every outlet

EPA’s 3Ts training walks districts through communicating the plan, learning how lead gets into water, building a sampling plan, collecting samples and interpreting results. Test every outlet students and staff drink from or cook with: fountains, bottle fillers, classroom sinks and kitchen taps. Keep the records; they’re what you’ll report to families.

Step 2: Take action at the tap, not just in the pipes

When results come back, districts weigh a short list of options. Each has a place, and each has limits:

Option What it does Where it falls short Where it fits
Flushing Runs water to clear what sat in the pipes overnight Temporary; depends on a daily routine; doesn’t purify the water A stopgap while a fix is planned
Pipe and fixture replacement Removes lead sources in the plumbing Capital project with long timelines; students still need water in the meantime Long-term building work, alongside point-of-dispense purification
Filters fitted to existing fountains A cartridge on each fixture One more cartridge per fixture to track; changes fall to custodial staff; old fountains stay old Limited, low-use outlets
Bottled water Replaces tap water at the outlet Recurring cost, storage, plastic Emergencies only
FloWater Refill Station 7x Advanced Purification at the fill point, with internal sanitization and FloWater-handled filter service Needs a water line, drain and outlet at each location; doesn’t replace your testing program Every high-traffic fill point: hallways, cafeterias, gyms, staff rooms

What to look for in a school drinking water fix

  • Certified purification. Ask which NSF/ANSI standards the specific model meets; NSF/ANSI 53 covers health-related reduction claims such as lead. 
  • Purification at the point of dispense, so water is treated after it has passed through the building’s plumbing.
  • A maintenance owner. Know who changes filters and when, before the first student fills a bottle.
  • Durability for heavy daily use in a hallway that sees every class change.
  • Water students want to drink. A fix nobody uses doesn’t fix anything.
  • Retesting after placement to document the result for families and your board.

How the FloWater Refill Station fits a district’s lead plan

The FloWater Refill Station runs water through seven stages: sediment, carbon, Advanced Osmosis, Activated Oxygen, alkalinity, minerals and a final coconut carbon polish. FloWater’s 7x page says the Advanced Osmosis stage removes up to 99% of contaminants such as lead, microplastics, PFAS and nitrates, and the full system removes up to 99.9%. FloWater lists NSF/ANSI 42, 53, 58 and 372, UL certification and ADA compliance among the standards its Refill Stations meet.

 

Activated Oxygen gives the Refill Station chemical-free sanitization of the stainless steel tanks, destroying bacteria between services. Filters are replaced at up to 12000 gallons or every year (whichever comes first), and a local, certified FloWater technician changes them in most cases. FloWater’s page for K-12 schools says placement takes about 90 minutes with no major construction or downtime, so a building doesn’t lose a school day.

A Refill Station doesn’t replace your testing program or pipe remediation. It makes sure the water students drink is purified at the moment they drink it, while the longer building work happens on its own schedule.

What to tell families, staff and your board

Families want three things from a district’s water plan: what was found, what changed, and how they’ll know it’s working. Share outlet-by-outlet results, mark which outlets are out of service and which have a FloWater Refill Station, and publish retest results once purification is in place. Staff need to know who to call if a fill point stops working and when filter service happens. Boards need a cost picture that compares one-time placement and annual service with recurring bottled water and the cost of keeping old fountains running. A plan people can see is a plan people trust, and trust is what gets students refilling instead of skipping water altogether.

The recommendation: a FloWater Refill Station at every fill point

Test every outlet, take high-result outlets out of service, and put a FloWater Refill Station at every high-traffic fill point. That’s the part of the 3Ts plan students see every day: cold, great-tasting water they trust enough to refill. Talk to FloWater about a Refill Station trial in one building, and use the results to plan the district.

This one needs a plumber

White Glove Placement isn’t on this order, so arranging that is up to you.

It’s real plumbing work; your Refill Station ties into a water line and a drain line, and needs a three-prong outlet nearby. We’re all for a good DIY project. This isn’t one of them. A licensed plumber is the right call, and a placement guide ships with your Refill Station for them to work from.